TY-F25 Flexo Plate Mounter
TY-F25 Flexo Plate Mounter
Product Specification
Suitable for use on all types of narrow web presses:
- Two sets of high magnification CCD cameras for accurate vision registration
- Unique lens and illumination setup allows cross mark targets on flexo plates to be easily visible on screen
- Can be custom built to required cylinder dimensions
TY-100P Registar Machine
Product Specification
- Table Top Model
- Optional Registration
- Manual Punch
- Suitable for small presses up to 29″
Product Specification
- Table Top Model
- Optional Registration with two different Punch
- Manual Punch And Pneumatic Punch
- Suitable for small presses up to 40″
- Can be Modified as per customer specification
- Bending system can also be installed as per requirement
TY-200 PB Registar Machine
Product Specification
- CCD Camera enable magnification of print register marks up to optical zoom easy visual inspection
- Can accept all offset plates up to size 4o inch plus
- Pneumatic system for plate punching
- Can Customize electrical equipment to your local specfications
Machine Dimension(L x W x H) : 1270mm x 820mm x 1360mm
Power Supply : 208-240V, Single phase, 50/60Hz
Net Weight : 250kg
TY-800 APB Registar Machine
Product Specification
- Specially developed for News paper Web Offset Presses
- Computerized Sequential 1-Step Action Of Optical Registration,Punching & Double-Edge Bending
- Dimension(L x W x H): 140cm x 133cm x 150cm
- Weight- App. 500kg
TY-800 AOL Registar Machine
Product Specification
- Specially developed for News paper Web Offset Presses
- Fully Automatic Model for Online Connection to CTP System
- Plates are continuously fed at high speed to be perfectly registered, punched and bended
- conveying system and stacker delivery as per customer requirement
| Detail Specifications | |
| Plate Type | PS Plate |
| Plate Thickness | 0.24 mm～0.4 mm |
| Plate Size | According to Customer Specifications |
| Punch / Bend Specs | According to Customer Specifications |
| Speed | 180 Plates /Hr
(Double edges are single bender) |
| Punch Precision | ± 0.02 mm |
| Bending Precision | ± 1 o |
| Power Requirements | ( AC 205~240V Single Phase 50/60HZ ) |
| Weight | Conveyer: 180Kg
Punch Bender: 550Kg Collector: 150Kg |
| Air Pressure Requirements | 6~9 bar |
| CCD Camera Search Area
|
Maximum area of 6 mm x 5 mm
If crossmark is not detected in this area, the plate will not be punched and bended. Plate will be rejected. |
| Machine Size
|
Conveyer: 1080x1080x765mm
Punch Bender: 1400x1380x1500mm Collector: 1000x1280x900mm
|
| Number of Punch and Bender | 4 to 5 punch and bender of different machines can be installed if cut off is same. |
Dampening Solution Filtration Machine
Product Specification
- Specially developed for anykind of sheet fed offset.
- Filter Composition: 5µ (4 filter) and 1µ (4 filter) in two separate containers with nylon filter core.
- special absorbent foam acts as protective layer to prolong lifespan of filter.
Dimensions(L x W x H): 750mm x 650mm x 1780mm
Power supply: 200-240v- 3 Phase
Weight : 100kg
Powder Extractor System Machine
Powder Extractstar is a Highly Efficient System
(Upper unit)
Product Specification
- Specially developed for anykind of sheet fed offset.
- Ensure a clean and health working area and space for operator
- Reducdant spray powder on the non-printed area of sheets
- Floating Powder during printing process will be efficiently extracted by Upper unit
- For small format sheets, the powder would fall onto ground will be collected and extracted efficiently by Bottom unit